HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Power Supply Build Quality Pictorial/Discussion

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 19th, 2011, 6:14 pm

:P That thing costs amost as much as a Corsair HX750W. Though HX750 is certainly preferable to the Thoughpower XT 575W. (better design, higher output capacity, longer warranty period and high efficiency. HX750 is based on CWT's DSG Gold design, which squeeze through 80plus gold certification and Corsair down-reted this unit to 80plus silver. TP XT 575W is DSG bronze.) :D
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 29th, 2011, 6:49 am

Internals of the SEED ADK-B500 500W power supply. No idea about the real manufacturer. SEED(the company) advertises that this PSU is 80plus certified. And you indeed can find its test report on 80Plus's offical website. But if you read the report carefully, you'll curiously find out that the rated input voltage range of this PSU is 180V-265V. Yet 80plus.org claims that all those tests were done under 115VAC. If the product could past 80plus's tests under 115V, why would the manufacturer want to limit the input voltage to 180V-265V. I really don't see the point of that. o.O

Image

Image

Image

Image

review could be found here: (in Chinese)
http://www.pcpop.com/doc/0/633/633942_all.shtml#p5

80plus report:
http://www.plugloadsolutions.com/psu_re ... Report.pdf
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » August 29th, 2011, 1:53 pm

Considering that it has APFC, 115v shouldn't be a problem.

Hmmm. SEED. If I get my hands on one of these, I might just plant it and see if it sprouts. Maybe I will be able to grow my own PSUs :D
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 29th, 2011, 4:21 pm

c_hegge wrote:Considering that it has APFC, 115v shouldn't be a problem.

There isn't a single good capacitor in it. :(

Hmmm. SEED. If I get my hands on one of these, I might just plant it and see if it sprouts. Maybe I will be able to grow my own PSUs :D


:lol: that's a good one.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » August 29th, 2011, 4:36 pm

duckula wrote:There isn't a single good capacitor in it. :(


So I see. It looks like they are all CS. I see them a lot in cheap junk PSUs, usually bloated and leaking.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 29th, 2011, 7:20 pm

Yup. That's a bad seed. :D
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » September 2nd, 2011, 4:29 am

Innards of the Huntkey WD500 500W power supply. Most of the capacitors on the secondary side are from FCON. One from Teapo and one from Rubycon (in charge of the +5VSB rail filtering).

Image

Image

Image

Image
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby MaxWar » September 2nd, 2011, 2:46 pm

This one has pretty colors :D
MaxWar
Member
 
Posts: 24
Joined: August 13th, 2011, 2:25 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » September 2nd, 2011, 3:09 pm

Those Fcon caps REALLY don't deserve the company of that lone Rubycon
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » September 5th, 2011, 12:52 am

Internals of the Corsair TX750M PSU.

Image

Image

Image

Image

More: http://www.techpowerup.com/reviews/Cors ... 50M/4.html
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

PreviousNext

Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 14 guests