HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Stupid Flight Sim

Everything goes... within reason!

RE: Stupid Flight Sim

Postby c_hegge » July 14th, 2011, 10:52 pm

Both CPU Cores are always at 100% in task manager when playing. It's already overclocked to 3.6GHz (the stock speed is 3.0GHz).
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Stupid Flight Sim

Postby duckula » July 14th, 2011, 10:54 pm

3.6GHz plus 500MHz, that would be 4.1GHz :D The stock clock of E8400 is 3.0GHz. E8400 processors normally have good over-clocking potential though.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Stupid Flight Sim

Postby shovenose » July 14th, 2011, 10:57 pm

Try 4GHz :D
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Stupid Flight Sim

Postby c_hegge » July 14th, 2011, 11:02 pm

If I go any higher than 3.6, it either doesn't POST or gets unstable. Remember, the multiplier is locked, so I can only increase the FSB. I didn't build be current system with overclocking in mind (it was a few years ago now). My board is a Gigabyte GA-EP45-DS3L, the L meaning "Lite" so it's really just built for reliability, not so much for overclocking.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Stupid Flight Sim

Postby duckula » July 14th, 2011, 11:10 pm

I really like those processors with unlocked multiplier such as i5 2500K and i7 2600k. It won't put to much pressure on the memory module(s) if you over clock the cpu by adjusting its multiplier.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Stupid Flight Sim

Postby c_hegge » July 14th, 2011, 11:12 pm

yeah and they're not that much more expensive than the standard ones IIRC.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Stupid Flight Sim

Postby duckula » July 14th, 2011, 11:18 pm

yup. you recalled correctly. :D

I don't know the exchange rate between USD and AUD though.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Stupid Flight Sim

Postby c_hegge » July 14th, 2011, 11:43 pm

an AUD is actually worth slightly more than a USD at the moment.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Stupid Flight Sim

Postby duckula » July 15th, 2011, 3:17 am

:-) cool
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Stupid Flight Sim

Postby shovenose » July 15th, 2011, 6:58 am

What about a Core 2 Quad Extreme Edition then?
If you got a Core 2 Duo 600MHz above stock then you should be able to get a Core 2 Quad to oveclock...and if you get one that has a high clock speed to begin with and an unlocked multiplier, you might even hit 5GHz :D That would probably get you an extra 0.1 FPS lol.
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Previous

Return to Off-Topic

Who is online

Users browsing this forum: No registered users and 24 guests

cron