HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

The 2014 El-cheapo Power Supply Roundup

Discuss the Reviews and Articles on hardwareinsights.com here!

Re: The 2014 El-cheapo Power Supply Roundup

Postby LongRunner » February 8th, 2015, 7:46 am

Another error on the page for the Powercase:

The input filtering consists of two X-Caps, two coils and two Y-Caps.

There's only one common-mode choke in that unit (and the following sentence concedes that there should be another).

Anyway, I take that Zhifa capacitors (as used in the Ultraview) are a knock-off of Zhila? :lol2:
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: The 2014 El-cheapo Power Supply Roundup

Postby c_hegge » February 8th, 2015, 10:56 pm

fixed
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: The 2014 El-cheapo Power Supply Roundup

Postby Pentium » February 22nd, 2015, 1:13 pm

I'm actually really impressed with the ripple suppression on the Honli. With one tiny cap per rail, it did reasonable, imagine how it would have been with two 2200µF caps and a coil per rail.

The Sun Pro did good considering 470µF input caps. Also, being 6 years old with crappy caps (and being low values), the ripple suppression was pretty good. Did you end up fixing it? This looks the same as the Sun Pro I worked on and posted on badcaps which managed a i7 980X and overclocked 9600GT at full load with the 12V above 12.25V at all times.

I was also really impressed with the Macron, even though I knew it was already a pretty good PSU. If that one could manage ~20A with a 16A ultra fast on the 12V, I wonder how it'd do with an upgrade. I have one that is recapped and has a 20A schottky on the 12V. I imagine that would increase the efficiency a few % as well.
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: The 2014 El-cheapo Power Supply Roundup

Postby c_hegge » February 23rd, 2015, 12:10 am

I didn't end up fixing any of them. I have more spare PSUs already than I know what to do with.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Previous

Return to Content Comments

Who is online

Users browsing this forum: No registered users and 48 guests

cron