DēLonghi HVS3032 EX:3
Posted: June 10th, 2023, 1:14 amWhile buying new appliances (when moving house) with Mum, I pondered giving Dumbplex (Dimplex) a chance to redeem themselves (their model might even be quiet which is a rarity in modern fan heaters); but these were staring at me from just a few meters away, and I figured it nice to have one in good condition again (given the original unit's wear from the younger one) so here we go (and I don't regret that call): https://www.hardwareinsights.com/delonghi-hvs3032/
Although I originally wanted to get a nice new camera, it's already winter here so I ended up taking a few more photos with my battered IXUS 500 HS.
(And we'll also have to sell the old house before I can afford the new camera
; other non-seasonal items can wait.)
Thanks to using my new downlights as makeshift photo lamps, I got surprisingly good lighting in some of them (although I did get tired near the end).
I'll probably also build my own site for future full reviews (having spent a decade here), but my micro/mini-review thread will continue for now…
If these are as well-built as older Italian-made DēLonghi models is debatable (I can't comment myself without seeing inside them), but they're clearly still far superior to the typical cheapos. (If you aspire to “automotive” quality standards, then I'd rate both the HVS and HSX series on a near-equivalent level.
That doesn't stop automobiles from having a lot of recalls, of course, but there's far less to go wrong here so I'm happy enough with that; if cars were built as badly as the worst cheapos, you'd be lucky to survive in one
.)
I recently saw in Coles that some of the cheap (AU$40 or so) convectors now have a tip-over switch (according to the box anyway); previously I would have chosen the HCM2030 over them for peace-of-mind, but this complicates the matter (so now it depends where you position the heater and how prone it is to being tipped).
DēLonghi will surely have to make an updated budget convector (HCM2030S or such) if they want to keep a comfortable position there (although among the convectors, I still recommend the HSX3324FTS – or HSX3324FS or HSX3324S, where available – if you can afford it; the HSX3324FTS is warming my unit)…
Although I originally wanted to get a nice new camera, it's already winter here so I ended up taking a few more photos with my battered IXUS 500 HS.
(And we'll also have to sell the old house before I can afford the new camera
; other non-seasonal items can wait.)Thanks to using my new downlights as makeshift photo lamps, I got surprisingly good lighting in some of them (although I did get tired near the end).
I'll probably also build my own site for future full reviews (having spent a decade here), but my micro/mini-review thread will continue for now…
If these are as well-built as older Italian-made DēLonghi models is debatable (I can't comment myself without seeing inside them), but they're clearly still far superior to the typical cheapos. (If you aspire to “automotive” quality standards, then I'd rate both the HVS and HSX series on a near-equivalent level.
That doesn't stop automobiles from having a lot of recalls, of course, but there's far less to go wrong here so I'm happy enough with that; if cars were built as badly as the worst cheapos, you'd be lucky to survive in one
.)I recently saw in Coles that some of the cheap (AU$40 or so) convectors now have a tip-over switch (according to the box anyway); previously I would have chosen the HCM2030 over them for peace-of-mind, but this complicates the matter (so now it depends where you position the heater and how prone it is to being tipped).
DēLonghi will surely have to make an updated budget convector (HCM2030S or such) if they want to keep a comfortable position there (although among the convectors, I still recommend the HSX3324FTS – or HSX3324FS or HSX3324S, where available – if you can afford it; the HSX3324FTS is warming my unit)…
