HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Xigmatek No Rules Power NRP-VC503

Discuss the Reviews and Articles on hardwareinsights.com here!

Xigmatek No Rules Power NRP-VC503

Postby c_hegge » July 1st, 2011, 3:28 pm

It's a middle-of the road solytech build. The explosion was one of the most spectacular I've seen, because all three transistors on the primary side blew.

http://hardwareinsights.com/xigmatek ... c503-500w/
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Xigmatek No Rules Power NRP-VC503

Postby shovenose » July 1st, 2011, 4:22 pm

:clap: Great review like always and the YouTube video of the explosion is a nice touch!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Xigmatek No Rules Power NRP-VC503

Postby duckula » July 2nd, 2011, 2:44 am

This's a solid review. No rules! :lol2: It's a hint from Xigmatek. It implies what the power supply's gonna act like.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Xigmatek No Rules Power NRP-VC503

Postby fincoder » July 4th, 2011, 3:33 pm

Great review c_hegge.
fincoder
New Member
 
Posts: 3
Joined: July 3rd, 2011, 7:47 pm

RE: Xigmatek No Rules Power NRP-VC503

Postby Th3_uN1Qu3 » July 6th, 2011, 11:30 am

You forgot the minus in "-12v". Otherwise, great job of blowing it up. Xigmatek has provided some fairly good supplies lately, but those weren't built by good ol' deer.
User avatar
Th3_uN1Qu3
Member
 
Posts: 60
Joined: March 21st, 2011, 3:09 pm
Location: Bucharest, Romania

RE: Xigmatek No Rules Power NRP-VC503

Postby c_hegge » July 6th, 2011, 3:50 pm

fixed
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Xigmatek No Rules Power NRP-VC503

Postby LongRunner » October 11th, 2013, 10:49 pm

The standby supply switcher blew too??? That's odd. You'd think only the main switchers would have been destroyed.

Unless the base drive transformer saturated and blew the transistors driving it, which shorted putting it directly across its supply, blowing the unprotected two-transistor self-oscillator. That sort of cascade failure is all I can think of.

By the way, it's an SBL3060PT on +12V, which I think is made by Lite-On.
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1032
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Xigmatek No Rules Power NRP-VC503

Postby c_hegge » October 11th, 2013, 11:39 pm

Either that, or maybe the 5vsb switcher overheated, as the other two were making the heat sink too hot for it. I do agree that it's unusual, though. I've never seen another PSU which blew the 5vsb and main switchers at the same time.

I fixed the rectifier bit
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Xigmatek No Rules Power NRP-VC503

Postby LongRunner » October 12th, 2013, 12:30 am

In test 6 you mixed up the voltage and load on -12V and +5VSB.
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1032
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Xigmatek No Rules Power NRP-VC503

Postby c_hegge » October 12th, 2013, 2:27 am

Fixed.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia


Return to Content Comments

Who is online

Users browsing this forum: No registered users and 18 guests