HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Antec SU-430 review

Discuss the Reviews and Articles on hardwareinsights.com here!
Post a reply

Antec SU-430 review

Postby c_hegge » July 11th, 2011, 1:58 am

http://www.hardwareinsights.com/antec-su-430-review/
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia
Top

RE: Antec SU-430 review

Postby Th3_uN1Qu3 » July 11th, 2011, 2:16 am

That... on a Seasonic built unit... me no like. :(
User avatar
Th3_uN1Qu3
Member
 
Posts: 60
Joined: March 21st, 2011, 3:09 pm
Location: Bucharest, Romania
Top

RE: Antec SU-430 review

Postby shovenose » July 11th, 2011, 5:39 am

@The_Unique yes it's a disgrace to Seasonic.
@c_hegge wonderful review!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm
Top

RE: Antec SU-430 review

Postby duckula » July 11th, 2011, 5:16 pm

:rapidfire: su-430
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm
Top

RE: Antec SU-430 review

Postby shovenose » July 11th, 2011, 5:50 pm

Lol. I knew somebody was going to :rapidfire: Antec sooner ot later
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm
Top

RE: Antec SU-430 review

Postby duckula » July 11th, 2011, 5:57 pm

I :rapidfire: su-430, you :rapidfire: antec. lol
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm
Top

RE: Antec SU-430 review

Postby c_hegge » July 11th, 2011, 6:07 pm

you guys stole my line. :rapidfire: antec is usually my line. :P
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia
Top

Re: Antec SU-430 review

Postby Wester547 » April 10th, 2013, 1:31 pm

I know this is really long in the tooth, but.... if this doesn't have dual +12V rails then how did you get separate ripple/noise measurements (and voltage regulation results) from each +12V rail in the load tester? :O
Last edited by Wester547 on September 11th, 2013, 3:11 pm, edited 2 times in total.
Wester547
Veteran Member
 
Posts: 154
Joined: July 8th, 2012, 2:07 am
Top

Re: Antec SU-430 review

Postby c_hegge » April 10th, 2013, 4:58 pm

My guess is that one connector might have had slightly better contact than the other. The same thing often happens to others too (see http://www.hardwaresecrets.com/article/ ... iew/1752/9 for example)
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia
Top

Re: Antec SU-430 review

Postby steenss » October 4th, 2013, 8:56 pm

When I upgraded my HTPC (Antec Fusion/SU-430 PSU) I noticed the missing 12V Pi filter & installed a suitable ferrite coil. The nearby 1000uf 16v 10mm OST RLS was replaced with an 8mm Rubycon MBZ for a bit of space.

Image
Click to view full-sized image!
steenss
Member
 
Posts: 14
Joined: November 5th, 2012, 11:48 pm
Top
Next
Post a reply

Return to Content Comments

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB® Forum Software © phpBB Group