Page 1 of 2

Our Power Supply Testing Methodology

PostPosted: August 28th, 2011, 11:41 pm
by c_hegge

RE: Our Power Supply Testing Methodology

PostPosted: August 29th, 2011, 5:30 am
by duckula
:) Nice artical. Looking forward to your next PSU review. (the HCG750W) :D

RE: Our Power Supply Testing Methodology

PostPosted: August 29th, 2011, 2:14 pm
by MaxWar
Really an interesting read! I especially love the ghetto load tester, that thing is awesome XD

RE: Our Power Supply Testing Methodology

PostPosted: August 29th, 2011, 2:52 pm
by shovenose
Yeah, its pretty cool. If i am ever in australia I might see it for real :D

RE: Our Power Supply Testing Methodology

PostPosted: August 29th, 2011, 3:12 pm
by c_hegge
Just in case you're wondering, I don't actually do the testing on the carpet. If a PSU explodes, the sparks would set the carpet on fire. The room with the carpet floor is just beter for photos.

RE: Our Power Supply Testing Methodology

PostPosted: August 29th, 2011, 3:48 pm
by shovenose
Lol. I didn't even notice that :D

RE: Our Power Supply Testing Methodology

PostPosted: August 30th, 2011, 11:52 pm
by c_hegge
I've built a second smaller load tester to use in conjunction with the bigger one. It only has 2 12v loads and draws 144W (12A) from each, bringing the total loading capacity up to 1KW, assuming the voltages don't drop too far below their nominal values. The HCG750 will be the next review I publish.

RE: Our Power Supply Testing Methodology

PostPosted: August 31st, 2011, 5:54 am
by shovenose
Cool :D do you want me to send you a picture of the box and box contents? because I took those before I sent it

RE: Our Power Supply Testing Methodology

PostPosted: August 31st, 2011, 1:44 pm
by c_hegge
Yes, that would be great.

Re: Our Power Supply Testing Methodology

PostPosted: March 7th, 2013, 12:36 am
by Wester547
I'm wondering... how long are the PSUs at Hardware Insights tested at each load and at what ambient/room temperature (or what "hot box", how long it takes to warm them up) are they tested at? I can't seem to find that info in the article, which is why I ask.