HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Thermaltake TR2 Bronze 600W

Discuss the Reviews and Articles on hardwareinsights.com here!

Thermaltake TR2 Bronze 600W

Postby c_hegge » November 20th, 2011, 3:02 pm

User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Thermaltake TR2 Bronze 600W

Postby shovenose » November 20th, 2011, 9:25 pm

Wonderful review :D
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Re: Thermaltake TR2 Bronze 600W

Postby Pentium » May 16th, 2013, 7:49 am

I like FSP, but it really annoys me when even in their higher end units they seem to skimp out on MOV's. I mean come on! I see MOV's in even low end chinese junk
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: Thermaltake TR2 Bronze 600W

Postby Wester547 » May 16th, 2013, 1:42 pm

^ I had a Huntkey 250W ("Dynex branded 350W") that was of their low end series and it too did not have MOVs. FSP aren't the only one. It is almost exactly the same as the PSU is in this thread, on Badcaps:

Link

Notice how it doesn't have any MOVs. Fortunately, the Huntkey I had was connected to a power bar that did have MOVs so all was well. I don't think the absence of MOVs is a big deal unless you have nasty power spikes and surges in your area, which can be a problem, especially on a 230V line voltage.
Last edited by Wester547 on May 16th, 2013, 11:55 pm, edited 1 time in total.
Wester547
Veteran Member
 
Posts: 154
Joined: July 8th, 2012, 2:07 am

Re: Thermaltake TR2 Bronze 600W

Postby Pentium » May 16th, 2013, 4:17 pm

^ Yeah I understand it's not the end of the world because you can have it on a surge protector but it's the principal of it too, if you're buying a nice 600W PSU, it should have those cheap MOV's in there. I know a lot of people who don't use surge protectors and have their Computer and Monitor plugged straight into the wall
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm


Return to Content Comments

Who is online

Users browsing this forum: No registered users and 31 guests