Bliss A-600 review
Posted: March 23rd, 2013, 1:10 pmPage 1 of 1
Posted: March 23rd, 2013, 1:10 pmRe: Bliss A-600 review
Posted: May 13th, 2013, 12:08 pmI actually kind of like this PSU...If the price was cut in half it would be a good unit to recap and use for a 400W system. Absolutely flawless 3.3V ripple, probably the lowest I've seen with that design at such high loads
Re: Bliss A-600 review
Posted: May 13th, 2013, 1:06 pmYeah, too bad it seems to have killed my old load tester. The scope rail select switch melted as the PSU failed.
Re: Bliss A-600 review
Posted: May 13th, 2013, 1:26 pmWow really?? 
Sorry to hear that. Is it repairable?
Sorry to hear that. Is it repairable?Re: Bliss A-600 review
Posted: May 13th, 2013, 4:06 pmYes, but I opted not to. I built a new better one which is quieter, and will go up to 1300W (as opposed to 700W on my old one)
Re: Bliss A-600 review
Posted: May 29th, 2013, 8:28 pmHow come the 3.3V ripple was so low, does it use DC-DC conversion? What is the model of your old load tester?
Re: Bliss A-600 review
Posted: May 29th, 2013, 8:55 pmI'm not too sure why it was so low, as it doesn't use DC-DC. Come to think of it, it might have been the switch failing and not making contact.