HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Power Supply Build Quality Pictorial/Discussion

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

RE: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » August 8th, 2011, 7:19 pm

Unforunately that is only too true!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 16th, 2011, 5:58 pm

:lol: Look at the tiny primary capacitor of the FSP AX-360HHN 300W power supply. :lol:

Please refrain from scorning at that 120uf OST because you are not always lucky enough to get a 120uf main cap. Sometimes it turns out to be a Capxon 100uf cap. :lol2: FSP is a big PSU manufacturer which just doesn't behave the way it should behave.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » August 16th, 2011, 10:28 pm

Excuse my language, but what a fucking sick joke of a capacitor.
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 16th, 2011, 11:00 pm

:s sorry for the joke if it bothers you.

Internal shot of the Huntkey HK500-AP 400W power supply. Half-bridge topology plus active PFC.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » August 17th, 2011, 3:54 am

@Duckula, If I can't scorn at the PFC capacitor, can I scorn at the tiny heat sinks? :lol:

btw, I think shovenose meant that the capacitor itself was a joke. He wasn't bashing your joke.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Power Supply Build Quality Pictorial/Discussion

Postby rulycat » August 17th, 2011, 4:56 am

In that FSP, the capacitor is less than half the size silkscreened!! :thumbsdown:
rulycat
New Member
 
Posts: 1
Joined: August 17th, 2011, 4:53 am

RE: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » August 17th, 2011, 7:14 am

duckula wrote::s sorry for the joke if it bothers you.

Internal shot of the Huntkey HK500-AP 400W power supply. Half-bridge topology plus active PFC.


I meant the capacitor was a joke lol. Not insulting you ;)
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 17th, 2011, 4:40 pm

shovenose wrote:I meant the capacitor was a joke lol. Not insulting you ;)

:pizza: OK. Sorry, I took it wrong. I thought I made some terrible mistakes (like poor sentence structure, improper phrase, etc. "Turn out to be..." is the 1st suspect. I think I used it wrong. ) again. :D. Well, no insulting was taken though.
:boxing: FSP. :rapidfire: OST, :rapidfire: Capxon.[hr]
c_hegge wrote:@Duckula, If I can't scorn at the PFC capacitor, can I scorn at the tiny heat sinks? :lol:

Typical FSP stylish heat sinks. :D
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » August 19th, 2011, 5:21 am

Internal shot of the Thermaltake ToughPower XT 575W 80plus bronze compliant PSU. I think its real manufacturer is CWT. I'm not sure which exact platform it is based on though.

BTW, how come the +12V output capacity of this PSU is slightly higher than its total power?
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » August 19th, 2011, 5:39 pm

lol at the label. I really do with that thermaltake would use japanese caps in their higher end PSUs. I've never seen a thermaltake with anything better than teapo. At least they don't use fuhjyyu.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

PreviousNext

Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 6 guests