HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Antec Phantom 350W

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

Antec Phantom 350W

Postby shovenose » April 10th, 2011, 6:30 am

It's a fanless PSU. It looks really impressive. it's quiet. And it's got this impressive looking blue light on the back that turns on instead of the fan so you know it's on, and it has a 6-Pin PCI-Express...

But looking into the rear vents I see an ugly capacitor with a "barbed wire" top...so does this PSU suck? It's going into an AMD Athlon 64X2 machine that might be used as a Media PC and/or email and/or folding@home...

Is a fanless PSU adequate? I did a 15 minute test run yesterday and it was not even warm at the back...

One damn impressive unit, heavy as hell, and i feel sorry for the $19.99 Rosewill case LOL!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Antec Phantom 350W

Postby c_hegge » April 10th, 2011, 5:17 pm

shovenose wrote:But looking into the rear vents I see an ugly capacitor with a "barbed wire" top...so does this PSU suck?
Yes it does. Antec uses Mucon branded caps in their phantom units which are as bad as fuhjyyu. They really haven't learned their lesson, and probably never will. I'd just forget the warranty and recap it. I do that to all PSUs which I intend on keeping, even if they're brand new.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Antec Phantom 350W

Postby shovenose » April 10th, 2011, 6:47 pm

I don't know how to open it! LOL!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Antec Phantom 350W

Postby c_hegge » April 10th, 2011, 7:51 pm

lol undo the screws :D
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Antec Phantom 350W

Postby shovenose » April 10th, 2011, 9:22 pm

lol no its ok why take it apart if it works just fine!!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: Antec Phantom 350W

Postby c_hegge » April 11th, 2011, 3:05 am

To make sure it stays that way
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: Antec Phantom 350W

Postby shovenose » April 11th, 2011, 7:58 am

Well, alright, I might give it a shot later today :-)
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm


Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 32 guests