HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Power Supply Build Quality Pictorial/Discussion

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

RE: Power Supply Build Quality Pictorial/Discussion

Postby duckula » September 9th, 2011, 4:30 am

And you must like this: High Quality Japanese Made Electrolytic & Solid Capacitors.

The two big capacitors in the picture are Rubycons. The bunch of polymers look like Nippon Chemi-con.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » September 9th, 2011, 3:21 pm

Yeah. I noticed that.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » September 28th, 2011, 2:28 am

This PSU was pulled out of a Lenovo desktop computer. OEM is Acbel. Look at the internals of the PSU... :lol:
Attachments
DSC00899_JPG_thumb.jpg
DSC00899_JPG_thumb.jpg (57.44 KiB) Viewed 22378 times
DSC00903_JPG_thumb.jpg
DSC00903_JPG_thumb.jpg (45.56 KiB) Viewed 22378 times
DSC00889_JPG_thumb.jpg
DSC00889_JPG_thumb.jpg (58.77 KiB) Viewed 22378 times
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » September 28th, 2011, 2:44 pm

I can't see any PI coils on the secondary, so ripple could be a problem. As for the LTEC caps, they seem to do quite well in delta units, but elewhere, they are maybe a tad better than fuhjyyu, maybe on par with capxon.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » October 4th, 2011, 6:07 pm

Cooler Master Silent Pro Hybrid series power supplies:
Image

http://www.techpowerup.com/153082/Coole ... eries.html
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » October 4th, 2011, 7:49 pm

80+Gold with those heat sinks - should be almost dead silent.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » October 4th, 2011, 8:25 pm

As Long as it's silent, just not dead.
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » October 4th, 2011, 10:50 pm

you know what I mean. I'll see if I can get CM to send me one once I get my oscillosope and review the antec
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » October 4th, 2011, 11:16 pm

PureOC has published a review for the Silent Pro Hybrid 1050W power supply.

http://www.neoseeker.com/resourcelink.html?rlid=244497

If their test results are trustable(I'm not sure about it), the ripple suppression of that unit is kind of disappoint.

Image

(see why I'm not sure about the reliability of PureOC's review? They wrote 5.5V instead of 5V and assumed the SPH 1050W was a 1000W unit and only pulled 1000W out of it.)
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » October 4th, 2011, 11:25 pm

c_hegge wrote:you know what I mean. I'll see if I can get CM to send me one once I get my oscillosope and review the antec


You may want to mod it if you get your hands on one. :mrgreen:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

PreviousNext

Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 14 guests