HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Antec VPA500P Review

Discuss the Reviews and Articles on hardwareinsights.com here!

Re: Antec VPA500P Review

Postby c_hegge » September 26th, 2013, 4:34 pm

It only uses one 13A PFC transistor. It will handle 500W on 220V, but would blow up if you pulled 500W from it on 110V
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Antec VPA500P Review

Postby LongRunner » October 4th, 2013, 1:25 am

What does "shortly" mean??? It's been 8 days.
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Antec VPA500P Review

Postby c_hegge » October 4th, 2013, 1:58 am

I think you meant to post that on the Dell 750W review. It has been fixed.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Antec VPA500P Review

Postby LongRunner » October 4th, 2013, 2:08 am

I was thinking of when you were going to review the VSK3500. But thanks anyway.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Antec VPA500P Review

Postby c_hegge » October 4th, 2013, 3:04 am

Oh I was thinking of when I said I would fix the error in that review shortly

I have written the review on the VSK. I'm just waiting for Shovenose to QC it before I actually publish it.

While we wait, here's a little spoiler

Image
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Antec VPA500P Review

Postby LongRunner » October 4th, 2013, 3:25 am

I'll hazard a guess...fail award???
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Antec VPA500P Review

Postby c_hegge » October 4th, 2013, 1:42 pm

Not quite. At least it is reasonably well ventilated for a Micro ATX case. If the ventilation was much worse, then yes, it would.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Antec VPA500P Review

Postby LongRunner » October 4th, 2013, 4:51 pm

Last visited: 2013/09/27 11:49

Oh come on...
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Antec VPA500P Review

Postby Wester547 » October 16th, 2013, 7:42 pm

Test 8 (455.5W Load)
Rail Load Voltage Ripple
12V 27.8A 12.27A 24.6mV
5V 14.64A 4.88A 14.4mV
3.3V 9.7A 3.2A 8.0mV
-12V 0.2A -12.27V 30.0mV
5Vsb 1.94A 4.85V 11.6mV
AC Power 575.6W
Efficiency 79.13%
Power Factor 0.97
Intake Temp 31°C
Exhaust Temp 43°C

Should be 12.27V, not 12.27A, don't you think? ;-)
Wester547
Veteran Member
 
Posts: 154
Joined: July 8th, 2012, 2:07 am

Re: Antec VPA500P Review

Postby c_hegge » October 16th, 2013, 8:31 pm

Fixed.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

PreviousNext

Return to Content Comments

Who is online

Users browsing this forum: No registered users and 41 guests