HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Freebie server

Post here about anything that doesn't fit specifically into any of the other categories, or if you're not sure what the problem is.
Post a reply

Freebie server

Postby c_hegge » May 23rd, 2014, 10:05 pm

I got myself a freebie HP ProLiant ML150 G3 (as well as two older PCs - an AXP and a s478 P4, and a thin client) for free in exchange for some help installing some new PCs at a local office here. Now I just have to decide what to do with it...
Attachments
IMGP4590.JPG
IMGP4590.JPG (503.28 KiB) Viewed 20015 times
IMGP4598.JPG
Side off. Looks in reasonable condition.
IMGP4598.JPG (509.44 KiB) Viewed 20015 times
IMGP4601.JPG
Air duct off. It was a bit of a shame to see that there were only two 560uF polymer caps installed around the CPU sockets.
IMGP4601.JPG (629.91 KiB) Viewed 20015 times
IMGP4602.JPG
Three HDDs installed. More specifically, 250GB WD Caviar REs. More on those in a minute
IMGP4602.JPG (423.06 KiB) Viewed 20017 times
IMGP4605.JPG
And my favourite part - the PSU. It's a Delta-DPS-650BB. Much like my two other Delta monsters (DPS-750CB and DPS-600MB), this one is a dual-PCB unit full of Rubycon and NCC caps.
IMGP4605.JPG (438.25 KiB) Viewed 20017 times
IMGP4609.JPG
BIOS Setup. Looks like we have a Xeon 5110 - a dual core 1.6GHz. I think that's about the slowest CPU that the thing supports.
IMGP4609.JPG (399.56 KiB) Viewed 20017 times
IMGP4612.JPG
WD and their so-called "enterprise" HDDs. It looks like we have a dead one.
IMGP4612.JPG (420.65 KiB) Viewed 20017 times
IMGP4613.JPG
I noticed while I had it running that the CPU fan sounded quite rattly. It's a bit blocked with dust, but I think this one will need a new fan too. The bearings sound horrible, even when turning it by hand.
IMGP4613.JPG (560.59 KiB) Viewed 20017 times
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia
Top

Re: Freebie server

Postby Wester547 » May 26th, 2014, 6:45 am

That looks like a Delta dual ball bearing fan, so I wonder if it's going bad.... the explanation I can think of is is that it might have been subject to caustic shock (IE, exceeding its shock resistance) at the hands of the previous owner or someone else. Or maybe it's just noisy because it's an aged dual ball bearing fan. Two 560uF polymers for the VCORE... that sounds like something ASUS would do. Who manufactured the motherboard?
Last edited by Wester547 on May 26th, 2014, 4:37 pm, edited 1 time in total.
Wester547
Veteran Member
 
Posts: 154
Joined: July 8th, 2012, 2:07 am
Top

Re: Freebie server

Postby c_hegge » May 26th, 2014, 4:28 pm

That PC has seen several years of 24/7 use, so I'm kind of leaning towards it being an aging ball-bearing fan. I'm not sure who the OEM is for the motherboard. I don't think it's ASUS, though. It doesn't have the backwards polarity markings on the capacitors. It actually bears a bit of a resemblance to some MSI-made HP boards. I'm really not too sure, though.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia
Top

Re: Freebie server

Postby TomHarding » April 19th, 2015, 10:45 pm

Are you in the US?
I'm in North West Coast...Happy to take a look if you can get it here?

[Edit] :@ Sorry just saw your in Austria. My bad.
TomHarding
New Member
 
Posts: 2
Joined: April 19th, 2015, 10:25 pm
Top

Re: Freebie server

Postby addseo1115 » June 7th, 2015, 6:17 pm

Nice to see you.
I am new around here.
Interesting discussion.
addseo1115
New Member
 
Posts: 3
Joined: May 9th, 2015, 11:35 pm
Top
Post a reply

Return to General Computer Discussion

Who is online

Users browsing this forum: No registered users and 12 guests

Powered by phpBB® Forum Software © phpBB Group
cron