HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

The 2012 El-cheapo PSU Roundup

Discuss the Reviews and Articles on hardwareinsights.com here!

Re: The 2012 El-cheapo PSU Roundup

Postby c_hegge » May 14th, 2013, 8:23 pm

It looks good. As long as you don't expect its rating from it, it will probably work well for a low end PC.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: The 2012 El-cheapo PSU Roundup

Postby Pentium » May 14th, 2013, 11:07 pm

I will just treat it as a 250 watter
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: The 2012 El-cheapo PSU Roundup

Postby Pentium » May 20th, 2013, 8:47 pm

I think I figured out who the OEM is. I Think it's ePower/Topower/Zumax. I have an ePower with the exact same layout and parts except it has ZU- markings on the transformer, ePower on the label, Topower UL number
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: The 2012 El-cheapo PSU Roundup

Postby c_hegge » May 20th, 2013, 9:20 pm

Possibly, but Topower usually have "TOP" markings, although I haven't seen a Topower PSU for a while now, so things could have changed. Many of those cheaper Zumax PSUs are actually built by Leadman, although I don't think they are behind these PSUs.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: The 2012 El-cheapo PSU Roundup

Postby Pentium » May 21st, 2013, 9:33 am

Yeah I know but I think Topower has been mixing it up...Oh I know I have seen some of the Leadman ones, they're pretty appalling. I hate Leadman as much as you hate Teapo....haha
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: The 2012 El-cheapo PSU Roundup

Postby LongRunner » May 27th, 2013, 9:19 pm

In the summary table for the Besta PT-550, you mixed up the 5V and 3.3V ripple values.

Also, it's clear from the photos that those Chemi-con primary caps are fakes. (It would surprise me if they were the real thing, given the general lack of quality in those PSUs...)
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: The 2012 El-cheapo PSU Roundup

Postby c_hegge » May 27th, 2013, 9:35 pm

^
I had a feeling that they may have been faked. I just didn't desolder them and verify. The primaries rarely fail anyway.

I have also fixed that mistake with the actual specs table.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: The 2012 El-cheapo PSU Roundup

Postby LongRunner » May 29th, 2013, 2:41 am

What about this???

...I was able to bull a fair bit more than this...

:D
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: The 2012 El-cheapo PSU Roundup

Postby c_hegge » May 29th, 2013, 3:16 pm

Fixed
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: The 2012 El-cheapo PSU Roundup

Postby Pentium » July 27th, 2013, 5:31 pm

Re reading these reviews I was a little surprised by the A1, how did that thing manage to pump out 320W with only 330uF input caps (that may even be 220uF) ?
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

PreviousNext

Return to Content Comments

Who is online

Users browsing this forum: No registered users and 25 guests