HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Silverstone Strider Gold S (SST-ST55F-GS)

Discuss the Reviews and Articles on hardwareinsights.com here!

Silverstone Strider Gold S (SST-ST55F-GS)

Postby LongRunner » May 9th, 2015, 6:44 pm

Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Silverstone Strider Gold S (SST-ST55F-GS)

Postby mockingbird » May 10th, 2015, 6:36 pm

Excellent review.

I really like your thoroughness.

When you said that the 5VSB was inefficient because it was an inexpensive standby chip, did you mean that this particular chip was inefficient, or that all standby circuits designed with a PWM chip are inefficient?

Cheers
mockingbird
Member
 
Posts: 20
Joined: May 10th, 2015, 6:34 pm

Re: Silverstone Strider Gold S (SST-ST55F-GS)

Postby LongRunner » May 10th, 2015, 9:32 pm

It's because they used an under-rated chip (and increased the no-load voltage in an attempt to compensate). You'd think a high-end unit could afford to do it properly, though.
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: Silverstone Strider Gold S (SST-ST55F-GS)

Postby Behemot » May 11th, 2015, 1:24 am

This one, there is a few corners which have been cut here. Overall with the better clamp meter and more precise low-power measurement, it seems most of the units do not even reach 80 %. But it could still be few percent better than this and that is with lower (closer to nominal) output voltage.
User avatar
Behemot
Administrator
 
Posts: 454
Joined: November 28th, 2014, 8:57 am
Location: CZ


Return to Content Comments

Who is online

Users browsing this forum: No registered users and 27 guests

cron